|Raw Material:||Mgo/mgcl2/fiber Glass Mesh||Type:||Free Standing|
|Capacity:||1100 Sheets/shift||Warranty:||1 Year|
eps sandwich panel production line,
roof panel roll forming machine
magnesium materials used building partition wall light weight panel making machine
Introduction of lightweight wall panel machine production line
(Compound) heat preserving lightweight wall panel adopts the newly high technology from South Korea, which is produced with the policy of lower investment but higher profit.
2.It includes five systems: Batching System, Mixing System, Slurry-infusing System, Molding System, and Automatic Demoulding System.
3.Process of producing: Material batching → mixing → slurry infusing → molding →automatic demoulding and stacking→ finished product
|serial number||Inspection items||
|4||Back to halogen resistance||No water, no get damp||No water, no get damp|
|6||Wet bilge rate||<0.6||0.40|
|7||With screw force||>15||61|
|8||The chloride ion content||<10||2.96|
|9||The factory of moisture content||<8||7.5|
|The average temperature in the furnace||
|The average combustion duration||
|The average mass loss rate||
About this production line ,among which ,Glue spreading-overlaying-drying Machine and Glazing Machine are equipment which will give the advanced processing to the board .the above two machine s can overlay and glaze the magnesium oxide board or orinary wood board . The Glue spreading-overlaying-drying Machine can overlay wood-grain paper,PVC film .The Glazing Machine will glaze the overlaied board with wood-grain paper,and make the board with bright light or dull light .The above processing will replace former painting working processing .(because the wood-grain paper is not wearable and it has no gloss degree)
There is not any requirement about high temperature and high pressure during production processing .the boarad will be formed at one time after roller-extruding under the conditions of normal temperation and normal pressure .this is a green environmental-protection project, because that there is no waste water ,waste materials and waste gas during its production processing .the finised board don’t need high temperature drying ,air-drying and watering ,and under the normal temperature ,they will dry well indoor .
1)Fully life-cycle value services
Our company provides mgo board production line design ,cost accounting,installation and operation,equipment maintenance and the whole life cycle techincal support
2)all-around thechnical service
We provide technical formula for clients,to help clients to occupy the leading position in the market.
3)complete data specification
Provide production line equipment technical data and instructions,and provide the mgo board production line formula.
The company regards product quality as the lives of enterprise,the main components and wearing parts are made of high quality wear-resistant materials and advanced processing technology,so that the equipment endurable and wear resisting ,wearing parts warranty for one year.
Contact Person: Mr. Kevin