|Keyword:||Straw Sheet Making Machine||Thickness:||Adjustable|
|Automatic Grade:||Automatic||Raw Material:||Mgo,mgcl,fiber Glass Mesh|
|Texture:||Strength Steel||Type:||Free Standing|
Wall Panel Roll Forming Machine,
roll forming equipment
Automatic XD-A series Magnesium Oxide straw panel making machine equipment
1. Product Introduction
Width: 1m, 1.2m, 1.5m, 1.8m, 2.0m and 2.2m, six types in total, and we can also customize different sizes.
Thickness: 30mm-80mm and 50mm-100mm, two types.
Capacity: 800-1500 square meters per day.
Control mechanism: full-automatic and semi-automatic.
2. Raw material and cost analysis
raw material feeding mechanism, sewing
mechanism, product outputting mechanism, cutting mechanism and automatic
control system, 5 parts in total.
|Names of materials||Each dosage|
Take 1200mm*2400mm*8mm Glass magnesium board an example in china.
3. Technology features
There is not any requirement about high temperature and high pressure during production processing. The board will be formed at one time after roller-extruding
under the conditions of normal temperature and normal pressure. This is a green environmental-protection project, because that there is no waste water, waste
materials and waste gas during its production processing. The finished board
don’t need high temperature drying, air-drying and watering, and under the normal temperature, they will dry well indoor.
This machine has strengths with good evenness, strong adaptability, quantity and tensile rate between vertical and horizon flexibility.
Besides, it overcomes the pulp discharge phenomenon of exceeding critical speed, and also makes paper dehydrate more quickly and convenient.
4. Equipment Model and Product Specification
Technical Index for
1. Oxygenic index%: 90
2. Level combustion: SO
3. Vertical combustion: SO
4. Water content rate: 10.9%
5. Capacity: 1.15g/cm3
6. Static bending intensity: 169.46Mpa
7. Density: T/ m31.13
8. Water resistance: Without chalking for 24 hours and there
is no change on surface
9. No Threewastes (waste water, waste gas and waste
residue), no pollution and environmental protection.
straw Board can be used for ceiling, wall skirting, decorating of
indoor wall and lining board for furniture.It can replace three-ply
board, five-ply board, flakeboard, MDF (Medium Density Fiberboard )
and Gypsum Board.
After purchased the equipment, our company will take responsibility for trainning
technical personnel until he can get the skill.
There are many professional technical personnel in our company, they will offer
consultation about the equipment and technology as well as technical training on
site for free. And they will go to your factory for installation and testing for free.
Welcome you to our company for a site visit, we will service for you sincerely.
Contact Person: Kevin