|
Product Details:
|
| Product Name: | Building Moulding Board Machine | Production Capacity: | 1500 Sheets |
|---|---|---|---|
| Warranty: | 1 Years | Standard: | CE |
| Type: | Free Standing | ||
| Highlight: | fiber cement board machine,sheet forming machine |
||
Fiber cement board production line
Fiber cement board line can produce fiber reinforced cement board (pressure board). Fiber reinforced cement board (pressure board) is a new construction material which has been pulping, moulding, compression, maintenance and so on. The products are widely used in variety kinds of industrial and construction fields such as external, internal walls, ceilings, sound insulation, and waterproof board for special facility.Because of its good features like lightweight, high strength,fireproof, waterproof heat insulation and easy to be machined, fiber reinforced cement board are favorable all over the world.
Product bulk density > 1.6g/cm3, Rupture strength 15-28Mpa.
Standard product dimension:
Length: 2400-2440mm
Width: 1200-1220mm
Thickness: 4-30mm
|
Annual output (m2) |
Quantity of moulding cars (set) |
Workers required
|
Prodction area (m2) |
Stacking area (m2) |
| 100,000 | 5 | 8-13 | 500 | 1,000 |
| 200,000 | 8 | 10-18 | 600 | 2,000 |
| 300,000 | 10 | 12-20 | 700 | 3,000 |
| 400,000 | 11 | 15-23 | 800 | 4,000 |
| 500,000 | 12 | 18-28 | 900 | 5,000 |
| 600,000 | 13 | 22-32 | 1000 | 6,000 |
| 700,000 | 14 | 25-35 | 1,100 | 7,000 |
| 800,000 | 15 | 28-38 | 1,200 | 8,000 |
| 900,000 | 16 | 32-42 | 1,300 | 9,000 |
| 1,000,000 | 17 | 35-46 | 1,400 | 10,000 |
| Remarks |
The parameters above in only for your reference.
|
|||
Features of Sandwich Panel Machine
1) Automatic controlled by Siemens PLC Controller.
2) Vertical molde car can move automatically.
3) Rail transfer system is remote controlled.
4) Vanjoin use 3m3 large-capacity mixer instead of mixer whose capacity is only 0.75m3. It can save time for both mixing and pouring.
5) Wall panel machine can make wall panels with board (calcium silicate board or fiber cement board), or panels without board.
Main systems of Vanjoin Wall Panel Production Line.
| capacity | 1200 |
This product can be used repeatly with such following features: waterproof, anti-breaking, anti-impact, even & glazed surface, easy operation and low cost, and it can be nailed, sawed, planed and sticked. It can replace steel moulding board, 5 ply panel, 9 ply panel and bamboo & wood moulding board, and be applied in all kinds of casting concrete eng
| Advantages | ||
| Number | Item | Content |
| 1 | Low cost | Low labour and raw materials costs |
| 2 | Long life | Up to 30 years |
| 3 | Recycling use | Reused for more than 8 times |
| 4 | Environment protection | Environment-friendly raw materials used |
| 5 | Flexible layout | adjusted according to your requirement |
Contact Person: Kevin
Tel: 86-18254101233
Fax: 86-531-82985999
