|Raw Material:||Mgo/mgcl2/sawdust||Texture Of Material:||Steel|
|Machine Application:||Producing Wall Panels||Main Process:||Forming|
|Feature:||Long Life||The Machine Classfication:||Wall Panel Making Machine|
|Spare Parts Supply:||Will Supply Any Time|
Fully Automatic MgO Board Production Line,
1.15g/Cm3 MgO Board Production Line,
60mm mgo board machine
China Advanced technology fully automatic magnesium oxide board production line
Magnesium oxide board production line
1. Brief introduction
Magnesium oxide board production line with fashionable design, reasonable structure, stable running manufactured board of even thickness in large production once through double- roller-extruding technology. This production line is equipped with shaking device which removes inside and outside air bubble, so our board is more smooth. In addition, we use the no-woven cloth as the separating film to increase the toughness and strength of the board. The machine can be adjusted arbitrarily, and then produce the board with the thickness of 2-60mm, the biggest width of 1, 300 mm and unlimited length. So you can adjust the thickness of board as you like.
2. Finished board size and features
3. Finished board features
1. Oxygenic index%: 90
2. Level combustion: SO
3. Vertical combustion: SO
4. Water content rate: 10.9%
5. Capacity: 1.15g/cm3
6. Static bending intensity: 169.46Mpa
7. Density: T/ m3 1.13
8. Water resistance: Without chalking for 24 hours and there is no change on surface
9. No Three-wastes (waste water, waste gas and waste residue), no pollution and environmental protection
A. Project Feature:
1. The source of the production raw materials is widely with no regional restriction. The product is made of magnesia, mgcl2,fiber glass mesh, on-woven fabrics and other fillers. The board is formed one-time by the machine.
It is easy operation, low production cost, small investment and fast effectiveness.
2. The automatic mgo board production line in China has high automatic degree, simple production technology, low labor intensity and production line, and there is no noise and three-wastes (waste water, waste gas and waste residue) during production.
3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.
4. It can produce according to different customers' request like size (length* width*thickness) , material .This automatic mgo board production line in China can produce boards Max length 3660mm and width is 1250mm.Thickness from 3-25mm.
B. Equipment Feature:
This automatic mgo board production line in China adopts the technology of double-drive double-roller-extruding, and the product is formed once after sizing, material feeding, spreading no-woven cloth, compounding and repressing.
fireproof mgo board production line. It runs stably with high automatic degree, the specification of its product can be adjusted arbitrarily.
The equipment actually realizes the industrial production-line of new model building wall board, and the product have even and glazed surface with high compactness.
The equipment largely reduces the labor intensity of worker and thoroughly changes many shortages of the former casting forming with upright mould or flat mould, such as large mould usage, low recycling rate, required electrical heating or steam heating, single kind of product as well as the sound insulation and heat-preserving which don’t meet the market requirements.
First use plastic film to wrap and cover the machine
Pack small parts in plywood box
marked with required label or shipping mark .
Use steel wire rope to fix the container ,so as to avoid to damage because of moving
|mgo board||fully automatic|
1. Q: Are you a factory or trading company?
A: We are a factory.
2. Q: What certificate do you have?
A: We have ISO and CE certificate.
3. Q: How does your factory do regarding quality control?
A: We have a special QC department in charge of products’ quality.
4. Q: How long is the warranty period?
A: All of our products have one year warranty.
5. Q: What’s the main market of your company?
A: We have customers all over the world.
6. Q: How much production capacity of your company one year?
A: This depends on your needs.
7. Q: Where is your factory located? How can we visit there?
A: Our factory is located jinan before you arrive jinan airport ,we will arrivethe airport in advance to pick you
Our Contact information,any question pls feel free tell me
Contact Person: Kevin