|
Product Details:
|
| Annual Output: | 5-20 Million Sqm/year | Board Size: | 1220x2440mm / 1200x2400mm |
|---|---|---|---|
| Thickness: | 3-25mm | Forming Process: | Hatschek Drum Or Flow-on Slurry |
| Raw Materials: | Quartz Powder, Fly Ash, Cement, Lime, Cellulose Fiber | Automation: | Semi Automatic To Full PLC |
| Installed Power: | 180-260kW | Workshop Area: | 600-1200sqm |
| Highlight: | non-asbestos fiber cement board line,asbestos free sheet forming machine,turnkey board plant commissioning |
||
A non-asbestos fiber cement board production line is not simply a sheet former with a different recipe on the wall. The whole slurry circuit, the fiber dosing station, the water recovery loop and the trimming section have to work together so that no chrysotile or amphibole fiber ever enters the mix, while flexural strength is still carried by cellulose pulp, PVA fiber and, where local codes ask for it, alkali resistant glass fiber. Shandong Chuangxin has been building board-making equipment since 1996, and this line is the version we ship most often to the Gulf, where asbestos bans are enforced at customs rather than at the plant gate. Rated from 5 to 20 million square meters of finished board per year, the line is delivered as a complete package: batching, mixing, forming, pre-curing, autoclave or air-cure scheduling, trimming, sanding, stacking and laboratory sampling.
Key Features| Parameter | Specification |
|---|---|
| Annual output | 5,000,000 to 20,000,000 sqm per year, single or double shift |
| Finished board size | 1220 x 2440 mm standard, 1200 x 2400 mm optional |
| Board thickness range | 3 mm to 25 mm, thickness change within one hour |
| Raw materials | Quartz powder, fly ash, cement, hydrated lime, cellulose pulp, PVA fiber |
| Forming process | Hatschek drum or flow-on slurry, buyer's choice |
| Automation level | Semi automatic to full PLC with recipe management |
| Installed power | 180 kW to 260 kW depending on capacity |
| Workshop required | 600 to 1200 sqm covered area, 6 m clear height |
| Operating crew | 12 to 18 persons per shift |
| Warranty | 12 months on wearing parts, lifetime technical support |
Boards from this line are used as exterior wall cladding on framed buildings, wet area partitions in hospitals and schools, kitchen and bathroom linings, ceiling panels and fire rated shaft walls. In the Gulf the same board specification is often ordered for labour accommodation and industrial sheds, where the buyer wants a Class A1 surface and a low water absorption figure, and in South America it is sold as a substitute for plywood sheathing under renders. Because thickness changes take less than an hour, a plant can accept a mixed order book of 6 mm cladding and 18 mm flooring substrate inside the same week and keep the curing racks full.
Packaging & Quality AssuranceThe line is packed in seaworthy plywood cases with galvanized steel framing on the forming section, and each case carries a packing list matched to the erection drawing set so the site team can open crates in the order they are needed. Wearing parts, filter cloths, trimming blades and one full set of gaskets travel with the shipment. We provide a one year warranty on wearing parts, remote support during Chinese working hours, and a spare parts price list valid for three years so a plant in a remote region is never blocked by a single seal. Before shipment the buyer receives an inspection report with run-in test data for the main drives, and we can host a pre-shipment witness test at our works in Shandong.
Contact Person: Kevin
Tel: 86-18254101233
Fax: 86-531-82985999