|
Product Details:
|
| Fire Classification: | A1 Non Combustible, Assemblies Up To 120min | Thickness: | 3-25mm |
|---|---|---|---|
| Board Size: | 1220x2440mm | Density: | 1.1-1.5g/cm3 |
| Curing: | Autoclave 1.0-1.2MPa | Drive Efficiency: | IE3 Motors With VFD |
| Installed Power: | About 230kW | Annual Capacity: | 4-12 Million Sqm |
| Highlight: | fire rated calcium silicate line,A1 non combustible board machine,3-25mm cement board equipment |
||
Fire performance is decided long before the board reaches a test furnace. It comes from the calcium silicate crystal structure formed during autoclaving, from a fiber blend that does not burn out below 1000 degrees Celsius, and from a density that stays uniform across the full 1220 mm width. This line is configured for buyers in Southeast Asia and the Middle East whose customers ask for an A1 non combustible classification and a one hour fire rated partition assembly. Thickness capability runs from 3 mm to 25 mm, the autoclave schedule is controlled by a dedicated temperature and pressure recorder, and the drive package uses IE3 efficiency motors with variable frequency control on the forming and conveyor sections, which pulls about fifteen percent off the connected load compared with a fixed speed layout of the same output. Shandong Chuangxin has supplied board equipment since 1996 and builds the pressure vessels to the buyer's local code.
Key Features| Parameter | Specification |
|---|---|
| Fire classification | A1 non combustible board, reference assemblies up to 120 minutes |
| Thickness range | 3 mm to 25 mm |
| Board size | 1220 x 2440 mm, cut to size available |
| Density | 1.1 to 1.5 gram per cubic centimeter |
| Forming process | Slurry forming with vacuum dewatering |
| Curing | Autoclave 1.0 to 1.2 MPa, or air cure for thin board |
| Drive efficiency | IE3 motors, VFD on main groups |
| Installed power | About 230 kW |
| Annual capacity | 4 to 12 million sqm |
| Warranty | 12 months on wearing parts |
Typical use is fire rated shaft wall and riser lining in high rise buildings, steel column and beam protection in warehouses, corridor partitions in hospitals and shopping malls, and ceiling panels in airports and stations where a non combustible ceiling is mandatory. In Indonesia, Vietnam and the Philippines the same board is used for kitchen and utility shaft lining in mid rise apartments, because it resists the periodic water ingress that destroys gypsum based boards. Middle East buyers often combine it with a mineral wool core to reach a two hour rating in industrial and petrochemical support buildings, and our engineers will review the proposed wall section against our test references before the order is placed.
Packaging & Quality AssuranceBoards and equipment are packed separately. Line equipment ships in seaworthy cases with the autoclave door and sealing ring protected by a steel frame, electrical cabinets travel sealed with desiccant and shock indicators, and instrumentation is boxed separately with a certificate set. Every pressure vessel is delivered with material certificates, radiographic and hydraulic test records and the nameplate drawing required for local registration. We provide a one year warranty on wearing parts, a three year spare parts price commitment, and remote diagnostics support by video call during Chinese working hours. Onsite commissioning covers the autoclave safety interlock test, the first fire rating sample run and operator training for three shifts.
Contact Person: Kevin
Tel: 86-18254101233
Fax: 86-531-82985999