|
Product Details:
|
| Board Width: | 1200mm Nominal | Thickness: | 4-20mm |
|---|---|---|---|
| Siliceous Material: | Fly Ash, Blended With Quartz Powder | Loss On Ignition: | Up To 5 Percent |
| Daily Output: | 300-700 Sheets/shift | Curing: | Autoclave 1.0MPa |
| Installed Power: | About 175kW | Wear Protection: | Ceramic Lined Valves, Hardened Screws |
| Highlight: | fly ash cement board line,industrial waste recycling board machine,1200mm width sheet line |
||
In Peru, Argentina and parts of Colombia, fine fly ash from power stations is cheap and locally available, while quartz powder has to be trucked in from far away. A board plant built on fly ash can therefore undercut imported sheet on cost, provided the mix design and the curing schedule are adjusted for the lower reactivity and variable carbon content of ash. This line is set up for exactly that situation: a two silo raw material section that allows blending of two ash sources, a slurry density control loop that compensates for loss on ignition variation, and a forming section rated for 1200 mm board width with 4 to 20 mm thickness. We have worked with buyers who started on quartz sand and moved to a fly ash blend to cut raw material cost by roughly twenty percent, and the equipment changes needed were limited to the batching section and the curing curve.
Key Features| Parameter | Specification |
|---|---|
| Board width | 1200 mm nominal, 1220 mm optional |
| Thickness range | 4 mm to 20 mm |
| Siliceous material | Fly ash, optionally blended with quartz powder |
| Loss on ignition tolerance | Up to 5 percent in blended mix |
| Daily output | 300 to 700 sheets per shift |
| Curing | Autoclave 1.0 MPa, 8 to 12 hour cycle |
| Installed power | About 175 kW |
| Wear protection | Ceramic lined valves and hardened screws in ash section |
| Workshop area | 800 sqm plus ash storage |
| Spare parts | One year kit included |
The product portfolio from a fly ash plant covers interior partition board, ceiling tile substrate, exterior cladding under render and floor substrate for dry construction. In Peru and Argentina, board made with local ash is typically sold to distributors serving self-build housing, where price per sheet decides the sale, and to contractors working on industrial warehouses where a grey unfinished face is acceptable. Because the ash reduces the free lime content, the board is also less prone to efflorescence under humid coastal conditions, a point that matters for projects near the sea. Where a client wants a lighter decorative face, we can add a coating section downstream, but most regional buyers keep the plant simple and sell the plain grey board.
Packaging & Quality AssuranceThe ash handling section ships with liners fitted and a spare set of wear plates in the same case, because sourcing compatible wear parts locally is difficult in most of the region. Equipment is packed in seaworthy cases, electrical cabinets sealed with desiccant, and the instrument list is cross referenced to the piping and instrumentation diagram supplied in the documentation set. We provide a one year warranty on wearing parts and a spares price list held for three years. Commissioning engineers work with the plant chemist on the first three mix designs, since fly ash from a new source almost always needs a small adjustment in lime and fiber ratio, and we hand over a mix design sheet that the plant can reproduce without us.
Contact Person: Kevin
Tel: 86-18254101233
Fax: 86-531-82985999