|
Product Details:
|
| Total Installed Power: | About 200kW | Running Demand: | About 145kW |
|---|---|---|---|
| Power Factor: | 0.95 Or Better | Hydraulic System: | Accumulator Holding With Oil Cooler |
| Output: | 350-750 Sheets/shift | Board Size: | 1220x2440mm |
| Thickness: | 4-20mm | Workshop Noise: | About 78dB At One Meter |
| Highlight: | energy saving board production line,200kw low noise cement board plant,hydraulic press cement board machine |
||
Electricity is often the second largest cost in a board plant after raw materials, and in Colombia, Ecuador and parts of Brazil the tariff structure penalises both peak demand and poor power factor. This line is designed to keep the connected load near 200 kW for a mid range output, using IE3 motors, variable frequency drives on the forming and fan groups, a hydraulic press with a pressure holding accumulator instead of continuous pump running, and a power factor correction panel that keeps the plant above 0.95. Buyers who compared our quotation against a heavier fixed speed line of nominally the same capacity usually find the difference in the monthly bill rather than in the purchase price, and we provide a load schedule so the buyer can model the saving against their own tariff before signing.
Key Features| Parameter | Specification |
|---|---|
| Total installed power | About 200 kW |
| Running demand | About 145 kW at nominal output |
| Power factor | 0.95 or better with correction panel |
| Hydraulic system | Accumulator holding, oil cooler for 45 degC ambient |
| Drive efficiency | IE3 motors with VFD on main groups |
| Output | 350 to 750 sheets per shift |
| Board size | 1220 x 2440 mm |
| Thickness range | 4 mm to 20 mm |
| Workshop noise | About 78 dB at one meter |
| Warranty | 12 months on wearing parts |
This configuration suits plants where the electricity tariff has a demand charge, or where production runs on a diesel generator with limited headroom. In Colombia and Ecuador, board plants are often located on the edge of secondary cities where the grid is stable but the tariff structure rewards a high power factor and a flat load profile. In Brazil the same line is used by buyers who sell board into the renovation market and run single shift production most of the year, then add a second shift for project peaks, a pattern that suits a line with a fast start-up and stable first sheet quality. The low noise package also helps in those locations where the industrial licence restricts operating hours.
Packaging & Quality AssuranceElectrical equipment ships in sealed cabinets with desiccant and shock indicators, and the capacitor bank is transported with the contactors mechanically locked. Hydraulic components travel with ports capped and hoses labelled to the piping diagram, and the accumulator is shipped discharged with a nitrogen charging kit included in the crate. Documentation includes the load schedule, the power factor calculation, as-built drawings and the maintenance calendar. We provide a one year warranty on wearing parts, a two year spares price hold and remote support during Chinese working hours. Commissioning takes about sixteen days and includes a power quality measurement at the plant incomer, so the buyer has a baseline to compare against once production stabilises.
Contact Person: Kevin
Tel: 86-18254101233
Fax: 86-531-82985999