Product Details:
|
Texture Of Materia: | Steel | Production Capacity: | 1500 Sheets |
---|---|---|---|
Automatic Grade: | Automatic | Function: | Fiber Cement Board |
Highlight: | fiber cement board machine,sheet rolling machine |
. Project Feature
1. The source of the production raw materials is widely with no regional restriction. The product is made of sawdust, straw (rice hulls), many kinds of crop straw and inorganic material (such as talcum powder, infusorial earth and powder coal ash) after special technology. So this project have low production cost, small investment and fast effectiveness.
2. The equipment has high automatization degree, simple production technology, low labor intensity and production line, and there is no noise and three-wastes (waste water, waste gas and waste residue) during production.
3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.
Compressive Strength | ~20 MPa (3, 000 PSI) |
Impact Resistance | > 6 kJ/m2 |
Tensile Strength | > 5.5 MPa |
Density (Specific Mass) | ~1000 Kg/m3 (+/-< 2%) |
Moisture Absorption | ~26% maximum saturation (slow absorption rate) |
Moisture Content | ~6% |
Water Vapour Diffusion | ~28 / 35 |
Specific Heat | ~930 J/kgK |
Thermal Conductivity | ~0.44 W / mK |
Modulus of elasticity | ~6045 N/mm2 |
Flexibility UNI E 12372 |
~20.1 N/mm2 maximum 12mm x 1220 x 2440 = 10 N/mm2 |
Surface Alkalinity | ~10 Ph |
Thermal Expansion Hot/Cold | 0, 01 mm/mC (from temp +20C to -20C) |
Expansion in Water | less than < 0.02% from ambient to saturation |
Freeze / Thaw - UNI EN 520 | 100 cycles without notable effects |
Frost Resistance | no water drops form on surface |
Combustibility / Fire Ratings | non-combustible / 12mm exceeds 1 hr fire rating |
Dimensional tolerance | thick 0.2mm / width 2mm / length 3mm / Sq. 3mm |
Toxicity Pollutants Heavy Metals - UNI EN 12457-2 | Below measurable levels of test instruments |
Asbestos Analysis | Absent - not measurable |
Formaldehyde Analysis | Absent - not measurable |
Sound Attenuation (9mm) | tested design ASTM E90 = STC 48, 50, 55, & 60 |
Color | Slate Grey and Chalk White |
Surface texture | smooth one side; uniform machine textured back |
Basic Compounds | (MgO)+(natural silicates)+(glass fibre)+(wood fibre) |
Contact Person: Kevin
Tel: 86-18254101233
Fax: 86-531-82985999