|Raw Materials:||Mgo.mgcl.sawdust.straw||Capacity:||1200 Sheets|
|Materials:||Strength Steel||Warranty:||One Year|
Construction Material Making Machinery,
polyurethane sandwich panel machine
1.mgo board equipment
provide materials part, produce board part, delivery part, enter board
part, cut edge part.
Equipment output: 1.7 million/year
Raw materials: Magnesium, magnesium chloride, perlite, sawdust, nonwovens, glass cloth
Mgo board equipment contribution conditions
2.Planning of mgo board rooms
3.mgo board consumption comparable table
|Names of materials||Each dosage|
Take 1200mm*2400mm*8mm Glass magnesium board an example in china.
4.Process of mgo board production
Put quantitative magnesium, magnesium chloride, perlite, sawdust into the blender.
Put non-wovens, glass cloth into the forming machine after opened. Molds are prepared on the platform of forming machine. Slurry fall into the mold and enter the forming machine. The standard glass magnesium boards are squeezed on the forming machine. Then cut into the needed length by
fixed-cutting machine, turn to the lateral shift system through transferring system, enter the oxidation room.
Put the oxidation glass magnesium board into water for dehalogenation treatment.
After dehalogenation, full-automatic fixed-cutting machine finished
fix-cutting, packaging, stacking and transported to a packing tested
district. All process end.
5.mgo board made by this machine
MgO Board Machine mainly produces all kinds of magnesium oxide boards, they can be used for ceiling, wall skirting, decorating of
indoor wall and lining board for furniture.It can replace three-ply
board, five-ply board, flakeboard, MDF (Medium Density Fiberboard )
and Gypsum Board.
|Oxygenic index %||>90|
|Water content rate||10.9%|
|Static bending intentsity||169.46Mpa|
Water resistance :Without chalking for 24 hours and there is no change on surface
No “Three-waste” (waste water ,waste gas ,waste residue),no pollution and environmental protection .
6. Technology features
There is not any requirement about high temperature and high
pressure during production processing. The board will be formed at
one time after roller-extruding under the conditions of normal temperature and normal pressure. This is a green environmental-protection project, because that there is no waste water, waste materials and waste gas during its production processing. The finished board don’t need high temperature drying, air-drying and watering,
and under the normal temperature, they will dry well indoor.
7. Equipment Model and Product Specification
According to different production, our equipment has 6 models for
large-scale, middle-scale and small-scale. Our all equipment can
produce board with same quality and specification but different production.The board with the thickness of 2-60mm, the biggest
width of 1, 300mm and unlimited length. So you can adjust the
thickness of board at will. The standard specification of the board
8.The one machine can manufacture several board
Wall decorating mural painting:The board produced by the board-
making machine can be made into various decorating art mural painting about landscape, flower-and-bird,insect-and-fish as well as character.
the product gets popularity from customers with excellent quality and reasonable price
Vent-pipe :The polystylrene sandwich panle produced by this machine
can be made into the vent-pipe used by the central air-conditioning
system and all kinds of ventilation facility ,and the product is fireproof ,damp-proof,antiseptic,light-weight,heat-preservation ,long-performance
life and low-price.In view of the above features,it wins much favor from users.
Building mould board :The strengthened mould plate with this
technology can replace steel mould board ,bamboo&wood mould board
and multiayer board .Being a high-profit product ,this board is applied
widely in all kinds of concrete engineering with low-cost,high strength,
long life and convenient to use .the board is high-profit product
1) Design the layout of factory (free)
2) Send engineers to install the machinery
3) Train your workers to produce the panels
4) Supply raw materials to you (such as calcium silicate board, additives)
5) Provide technical support to you forever (free)
Contact Person: Mr. Kevin