|Material:||Steel||Name:||Straw Board Machine|
|Warranty:||1 Year||Type:||Free Standing|
|Main Process:||Forming||Application:||Making Boards|
|Place Of Origin:||Shangdong China|
Wall Panel Roll Forming Machine,
roll forming equipment
email : email@example.com
whatapp : +86 13064036440
multi-functional high strength Fireproof Straw board forming machine
straw board machine mainly produces all kinds of straw boards, they can be used for ceiling, wall skirting, decorating of indoor wall and lining board for furniture.It can replace three-ply board, five-ply board, flakeboard, MDF (Medium Density Fiberboard ) and Gypsum Board.
2. Raw material and cost analysis
The product is formed with crushed crop straw or sawdust and some inorganic
chemical materials at one time after roller-extruding. The source of raw materials
is widely and they are purchased easily for customers.
Take specification of 1.22mX2.44mX3mm as example, the cost is 7~8 Yuan, and
the market price is generally 13~16 Yuan.
straw board consumption comparable table
|Names of materials||Each dosage|
Take 1200mm*2400mm*8mm Glass magnesium board an example in china.
3. Technology features
There is not any requirement about high temperature and high pressure during production processing. The board will be formed at one time after roller-extruding
under the conditions of normal temperature and normal pressure. This is a green environmental-protection project, because that there is no waste water, waste
materials and waste gas during its production processing. The finished board
don’t need high temperature drying, air-drying and watering, and under the normal temperature, they will dry well indoor.
4. Equipment Model and Product Specification
According to different production, our equipment has 6 models for large-scale,
middle-scale and small-scale. Our all equipment can produce board with same
quality and specification but different production.
The board with the thickness of 2-60mm, the biggest width of 1, 300mm and
unlimited length. So you can adjust the thickness of board at will. The standard specification of the board is 1.22mX2.44m.
Technical Index for
1. Oxygenic index%: 90
2. Level combustion: SO
3. Vertical combustion: SO
4. Water content rate: 10.9%
5. Capacity: 1.15g/cm3
6. Static bending intensity: 169.46Mpa
7. Density: T/ m31.13
8. Water resistance: Without chalking for 24 hours and there
is no change on surface
9. No Threewastes (waste water, waste gas and waste
residue), no pollution and environmental protection.
straw Board can be used for ceiling, wall skirting, decorating of
indoor wall and lining board for furniture.It can replace three-ply
board, five-ply board, flakeboard, MDF (Medium Density Fiberboard )
and Gypsum Board.
After purchased the equipment, we will teach relevant technology for free, and
will go to your factory for installation and testing until you can produce the
qualified product by yourself. Our company will train 2-3 technical personnel
for free until he can get the skill. We will take responsibility for provide technical consultation and following-up service for a long time, the equipment warranty
period is one year.
Contact Person: Mr. Kevin